Known good radios compatible with M17
Kenwood
Model | RX | TX | Comments |
---|---|---|---|
TM-D710 (A/G/GA) | ![]() | ![]() | TX needs to be inverted |
TM-V71A | ![]() | ![]() | TX needs to be inverted |
Motorola
Model | RX | TX | Comments |
---|---|---|---|
CDM750 | ![]() | ![]() | Unverified but should be same as CDM1250/1550. |
CDM1250 | ![]() | ![]() |
|
CDM1550 | ![]() | ![]() | Configure codeplug to use “flat audio” available on rear accessory connector. |
GM300 | ![]() | ![]() | Demod out is inverted. Adding a 100k resistor is needed for the RX to work. Move jumper JU551 to pos. A. |
GM900 | ![]() | ![]() |
|
GM1200 | ![]() | ![]() | Demod out is not inverted. No HW mod necessary for RX. |
Yaesu
Model | RX | TX | ||
---|---|---|---|---|
FT-817 | ![]() | ![]() | Tested with STM32-DVM-USB and latest MMVDM firmware using M17Client / M17GUI. No modifications needed. | |
FT-818 | ![]() | ![]() | ||
FT-7800 | ![]() | ![]() | ||
FT-8000 | ![]() | ![]() | No modification needed. Use the 9600baud output at the TNC connector. | |
FT-8900 | ![]() | ![]() | ||
FTM-6000 | ![]() | ![]() | No modification needed. Use the 9600baud output at the TNC connector. |
Icom
Model | RX | TX | |
---|---|---|---|
IC-706mkIIg | ![]() | ![]() |